Guides

CS2 mouse settings: sensitivity, DPI, eDPI and polling rate

Counter-Strike 2 mouse settings by their in-game names, the console variables behind them, raw input and acceleration in the game files, and what DPI, eDPI and polling rate mean.

By CSgoFriendsPublished Last checked

A Counter-Strike 2 screenshot from the game's Steam page
Image: Valve, Counter-Strike 2 on Steam

Key facts

  • Menu sliderMouse Sensitivity from 0.1 to 8.0
  • Defaultsensitivity 1.25 in the console variable list
  • eDPIDPI × in-game sensitivity (ZOWIE, Corsair)
  • Raw inputno raw input or acceleration setting in the game files

Watch

Video: Cederic Schmid on YouTube

Video: louiecs2 on YouTube

From other channels; the video plays on YouTube after you click, and YouTube's privacy policy applies.

Counter-Strike 2 (CS2) has these mouse settings in its menu: Mouse Sensitivity, Zoom Sensitivity Multiplier and Reverse Mouse. This guide covers each one with the console variable behind it, then explains DPI, eDPI and polling rate in the words of the mouse makers.

To convert a sensitivity or find your eDPI, use our CS2 sensitivity calculator.

For mouse shapes and hardware specifications, see best mouse for CS2.

CS2 mouse settings in the menu

The settings are under Keyboard & Mouse Settings.

Setting Range in the menu Console variable Default in the variable list
Mouse Sensitivity 0.1 to 8.0 sensitivity 1.25
Zoom Sensitivity Multiplier 0.01 to 3.0 zoom_sensitivity_ratio 1
Reverse Mouse Off, On

The console variable list describes them:

  • sensitivity: “Mouse sensitivity.” In the console, it accepts values from 0.0001 to 8, while the menu slider goes from 0.1 to 8.0.
  • zoom_sensitivity_ratio: “Additional mouse sensitivity scale factor applied when FOV is zoomed in.”
  • m_yaw and m_pitch are both 0.022, the “Mouse yaw factor” and “Mouse pitch factor.”

With Reverse Mouse on, the game binds the vertical mouse axis to the reversed pitch (!pitch instead of pitch).

Raw input and mouse acceleration

The CS2 console variable list has no raw input setting for the mouse and no mouse acceleration setting. There is no m_rawinput, no m_customaccel and no m_mouseaccel in the list of Nov. 11, 2026, or in the oldest list in the GameTracking-CS2 mirror, from Oct. 3, 2024. The only “raw” input variable in the list is for the keyboard: cl_input_enable_raw_keyboard, “Enable raw keyboard input,” off by default.

How CS2 reads mouse input

Valve’s page that introduced CS2 explained sub-tick updates: “Tick rate no longer matters for moving, shooting, or throwing.” It added: “Thanks to Counter-Strike 2’s sub-tick update architecture, servers know the exact instant that motion starts, a shot is fired, or a ’nade is thrown.”

Changes to mouse input in Valve’s notes:

  • Nov. 8, 2023“The visual and audio feedback from sub-tick input—such as movement acceleration and muzzle flashes—will now always render on the next frame.”
  • Feb. 6, 2024“Fixed a case where high-DPI mice would result in jittery mouse movement.”
  • May 29, 2024“Joystick input is now ignored by default. Joystick input is not an officially supported feature of CS2, but you can restore the old behavior with the -joy launch option.”
  • Oct. 23, 2024“Fixed mouselook inconsistencies when game render dimensions are different from game window dimensions.”
  • Aug. 18, 2025“Fixed a case where relative mouse motion was incorrect on Linux.”

What DPI means

ZOWIE: “DPI, or dots per inch, is a measurement that defines how sensitive a mouse is, indicating how far your cursor moves on-screen based on the physical movement of the mouse.”

Some makers say CPI instead. SteelSeries: “CPI (counts per inch) and DPI (dots per inch) are terms used interchangeably to measure mouse sensitivity.” Both “refer to how much a mouse cursor moves per inch of physical mouse movement.”

ZOWIE on the other half: “In-game mouse sensitivity is a software setting that controls how much your crosshair moves in response to your physical mouse movements.”

What eDPI means

ZOWIE: “eDPI, or effective DPI, is the combination of your mouse’s DPI (dots per inch) and your in-game mouse sensitivity.” The formula, in ZOWIE’s words: “eDPI = DPI × In-Game Mouse Sensitivity.” Corsair gives the same formula.

Our sensitivity calculator works it out for any values. The sensitivity, DPI and eDPI of seven pro players, from our CS2 pro settings guide, with the source of each line:

PlayereDPIDPISensitivityZoomPolling rateResolutionSource
EliGE1,1841,6000.740.82,000 Hz1680x1050, 16:10, stretchedTeam Liquid, March 24, 2026
KSCERATO1,0204002.5511,000 Hz1280x960Twitch panel, undated, checked Nov. 6, 2026
malbsMd8004002.0014,000 Hz1280x960, 4:3, stretchedTeam Liquid, March 24, 2026
ultimate7608000.9514,000 Hz1280x960, 4:3, stretchedTeam Liquid, March 24, 2026
xKacpersky7324001.831920x1080Twitch panel, undated, checked Nov. 6, 2026
siuhy6804001.714,000 Hz1920x1080, 16:9, nativeTeam Liquid, March 24, 2026
NAF6408000.80.84,000 Hz1280x960, 4:3, stretchedTeam Liquid, March 24, 2026

What polling rate means

Logitech: “It’s how often your mouse reports its position and button presses to your computer, measured in hertz (Hz).” And: “a 125 Hz polling rate means the mouse sends updates 125 times per second (once every 8 milliseconds). A 1000 Hz polling rate sends updates 1,000 times per second (once every millisecond).”

Polling rateUpdates per second
125 Hzonce every 8 milliseconds125
1000 Hzonce every millisecond1,000
Numbers from Logitech's explanation of polling rate.

Logitech also explains the difference: “DPI (dots per inch) controls cursor speed, while polling rate determines how often the cursor updates.”

Logitech Support calls it report rate too, and warns: “A few users may experience a drop in frames per second (FPS) when the report rate of the mouse is set to values above 1kHz.”

FAQ

What is the default mouse sensitivity in CS2?

1.25, the default of the sensitivity variable in the game’s console variable list.

Does CS2 have raw input?

There is no raw input setting for the mouse in the CS2 console variable list. The only raw input variable is for the keyboard.

Does CS2 have mouse acceleration?

The CS2 console variable list has no mouse acceleration setting.

How do I calculate eDPI?

Multiply your mouse DPI by your in-game sensitivity. ZOWIE: “eDPI = DPI × In-Game Mouse Sensitivity.”

What is the difference between DPI and polling rate?

Logitech: “DPI (dots per inch) controls cursor speed, while polling rate determines how often the cursor updates.”

What does Zoom Sensitivity Multiplier do?

It is an “Additional mouse sensitivity scale factor applied when FOV is zoomed in,” with values from 0.01 to 3.0 in the menu.

Sources